Question:
1994 chrysler lhs kill switch?
streetsent
2006-04-08 16:40:51 UTC
my alarm keeps going off how do i turn it off
Four answers:
Ivan
2006-04-08 16:41:47 UTC
take it to the dealer
?
2016-11-12 13:51:28 UTC
those are the indicators of low transmission fluid. With engine/transmission at widespread operating temperature park on flat factor floor, go away engine operating, pull stick and wipe, insert and wait some seconds and pull decrease back out keeping it vertical so it gained't run up the stick and promises an incorrect interpreting. it truly is going to be on the nice and cozy line. If not upload as needed. Then attempt force. If it nevertheless slips, you ought to bypass to a save. both the bands can must be adjusted or worse a sparkling/rebuilt tranny.
Kentuckygearhead
2006-04-09 04:50:11 UTC
make sure your remotes are not the problem first by removing batteries/if that is not it/check all pin switches in doors to make sure they are not sticking or rusty(WD-40 cleans and frees these up good)/there is not much else you can do as you need chrysler diagnostic equipment to diagnose problems/refer to your owners manual for override procedures if there are any
NEWBEE1
2006-04-12 21:33:18 UTC
Try this link:


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...